Qualified Products 620 Grounding and Lightning Protection 630 Conduit 632 Signal And Interconnect Cable 635 Pull And Junction Boxes 639 Electrical Power Service Assembly 641 Concrete Strain Poles 646 ALUMINUM POLES, PEDESTALS AND POSTS 649 Galvanized Steel Strain Poles,Mast arms And Monotube Assemblies 650 Vehicular Traffic Signal Assembly 653 Pedestrian Signal Assembly 654 Midblock Crosswalk Enhancement Assemblies 659 Mast Arm, Span Wire, And Pole Mounting Assemblies 660 Vehicle Detector 663 SIGNAL PRIORITY AND PREEMPTION SYSTEMS 665 Pedestrian Detector 671 Traffic Controller 676 Controller Cabinet 678 Traffic Controller Accessories 682 VIDEO EQUIPMENT 684 NETWORK DEVICES 685 TRAFFIC CONTROL SYSTEM AUXILIARIES 700 ROADWAY SIGNS 706 RAISED PAVEMENT MARKERS AND BITUMINOUS ADHESIVE

700 - ROADWAY SIGNS A ) 24/7 Sign Beacon Controller Assembly Ground-mounted solar powered assembly requires use of approved 4 inch nominal (4.5” O.D.) Schedule 80 aluminum pedestal and reinforcing pedestal base collar. FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-026-013 06/13/2016 Carmanah Technologies Corp. Model R247-G approved with 80W solar panel, Dialight 12 VDC Red (433-1210-000XL) or Yellow (433-3230-900XL) LED Module, Eagle signal head housing, and 100Ah battery 676-011-002 04/30/1985 Transportation Control Systems Model: 2266082AT/S w/ Reno A&E FL-200 Type 3 flasher and SE-1100 cabinet mount; AC-powered. B ) School Zone Sign Beacon Controller Assembly Ground-mounted solar powered assembly requires use of approved 4 inch nominal (4.5” O.D.) Schedule 80 aluminum pedestal and reinforcing base collar. FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-026-014 06/10/2016 Carmanah Technologies Corp. Model R829-G approved with 80W solar panel, Dialight 12 VDC Yellow (433-3230-900XL) LED Modules, Eagle signal head housings, 100Ah battery, and RTC AP-22 time switch. 676-011-012 05/29/2014 Temple Inc. Model: TF4001F-FL, Type I wired cabinet with Model 204 Flasher and Pelco SE 1100 mounting kits for mounting on 4” pedestal. For non-pedestal mounting, use Pelco SE-0120 cabinet mounting bracket where suitable. C ) Electronic Speed Feedback Signage (ESFS) Use ASTM Type XI fluorescent yellow sheeting for feedback display panel used in non-school related sign beacons operating 24/7 (e.g.: hazardous curves, crossings and visibility); School Speed Zones beacons must use ASTM Type IV fluorescent yellow-green sheeting and be programmed to permit sign operation (feedback display) only during school zone hours/days; radar operation data collection can operate continuously or variable selected hours/days; feedback display - Yellow LED’s Alpha/Numeric only; Solar powered or 120 Volt AC. FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-019-001 08/03/2007 Carmanah Technologies Corp. SpeedCheck-15; AC-powered and Solar-powered (80W panel & 100AH C&D Tech. Model VRS 12-100HIT battery) NOTE: Sign face legends, layouts and borders require separate MDPW TS and S submittal approval per technical specification. D ) Blank-Out Signs Aluminum Housing; Color: Flat Black; Various LED light source for display Symbol/Message conformance with MUTCD; For aerial attachment to mast arms, sign gantries, span wire and overpasses; (PWWM Interim Compliance with FDOT MSTCD Section A700 Electronic Display Signs for Blank-Out Signs [BOS] ). FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-012-010 05/20/2005 Southern Manufacturing (a Division of Ernest Products Inc.) Model LED Blankout Series* 700-012-012 05/01/2014 Transportation Control Systems Models TCSLEDBO Series* NOTE: Specialty Signs are approved under FDOT APL 700 for IISNS (Used for sign legends i.e.: “PEDESTRIAN CROSSWALK”, “EMERGENCY SIGNAL”, etc.) Sign face legends, colors, layouts and borders require separate PWWM TS&S submittal approval per technical specification. E ) AGM Batteries for use with Solar-Powered ESFS or Sign Beacon Assemblies Battery shall be deep cycle solar rated, Valve Regulated Lead Acid (VRLA), Absorbent Glass Mat (AGM) sealed lead acid; Spill proof construction; Nominal Voltage: 12V 100 Amp Hrs.; Minimum Operating Temperature Range between: -4°F (-20°C) - 122°F (50°C) FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION N/A 09/30/2021 C&D Technologies Inc. Model VRS 12-100HIT N/A 01/27/2022 East Penn Manufacturing Co Model MK 8A31DT F ) Blank-Out Signs Aluminum Housing; Color: Flat Black; Various LED light source for display Symbol/Message conformance with MUTCD; For aerial attachment to mast arms, sign gantries, span wire and overpasses; (PWWM Interim Compliance with FDOT MSTCD Section A700 Electronic Display Signs for Blank-Out Signs [BOS] ). FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-012-010 05/20/2005 Southern Manufacturing (a Division of Ernest Products Inc.) Model LED Blankout Series* 700-012-012 05/01/2014 Transportation Control Systems Models TCSLEDBO Series* G ) Internally Illuminated Street Name Signs (IISNS) Aluminum Housing; Housing Color: Flat Black; (Compliance with PWWM TSS Division Interim Specification titled: “Internally Illuminated Street Name and Specialty Signage”, dated 11/24/2010) FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-015-021 04/12/2005 Southern Manufacturing (a Division of Ernest Products Inc.) Model SSLED Series 700-015-020 05/04/2005 Transportation Control Systems TCSSIGNFLO*** 700-015-024 07/09/2012 Transportation Control Systems BriteLite TCSSIGNBL Series mounted with Pelco SP-1010-FL 700-015-025 11/09/2007 Transportation Control Systems TCSSIGNLED Series NOTE: Sign face legends, layouts and borders require separate MDPW TS and S submittal approval per technical specification. H ) Internally Illuminated Specialty Signs (IISS) Aluminum Housing; Color: Flat Black; (Compliance with PWWM TSS Division Interim Specification titled: “Internally Illuminated Street Name and Specialty Signage”, dated 11/24/2010) FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION 700-015-021 04/12/2005 Southern Manufacturing (a Division of Ernest Products Inc.) Model SSLED Series 700-015-020 05/04/2005 Transportation Control Systems TCSSIGNFLO*** 700-015-025 11/09/2007 Transportation Control Systems TCSSIGNLED Series "NOTE: Specialty Signs are approved under FDOT APL 700 for IISNS (Used for sign legends i.e.: “PEDESTRIAN CROSSWALK”, “EMERGENCY SIGNAL”, etc.) Sign face legends, colors, layouts and borders require separate PWWM TS&S submittal approval per technical specification." I ) Photo Control For use with Internally Illuminated signs; 120V 15Amp; Rated: 1800 Watt Tungsten; Ballast 1000 VA; 15 Amp Tungsten; 8.3 Amp VAC; Temperature range: - 40°F to+158°F (UL); Compliance with MDPW Traffic Signals and Signs Division technical specification: Internally Illuminated Street Name and Specialty Signs Specification, Revised October 2009. FDOT_APL_NO APPROVAL MANUFACTURER DEVICE_DESCRIPTION N/A 08/01/2009 Intermatic Inc. K4221C/1/2"-14 threaded stem; swivel Transportation Control Systemswww.tcstraffic.com Intermatic Inc.www.intermatic.com C&D Technologies Inc.cdtechno.com/ Southern Manufacturing (a Division of Ernest Products Inc.)www.southernmfg.com Carmanah Technologies Corp.www.carmanah.com Temple Inc.www.temple-inc.com East Penn Manufacturing Cowww.eastpennmanufacturing.com/divisions/transportation/ HISTORY: MOR Manufacturing (3M) Urban DFB Series APL # 70030101603021(02/18/10) 3M stops production 01/2011; DELETED from QPL (12-01-10) MOR Manufacturing (3M) deleted listing permanently removed (03-01-11) Addition of Solar Batteries for ESFS to QPL (03-02-11) Addition of Blank-Out Signs for EDS-BOS to QPL (12-22-11) QPL FEB2012 FINAL 02-07-12 IISNS and IISS Mast Arm Hanger(Located under Section 659 - SIGNAL HEAD AUXILIARIES) Last Modified on : 10/21/2022 11:30:19 AM